Practice MCQs and read articles about Chemical Engineering
20 of 50 Chemical Engineering questions, shown with their correct answers — open an answer to check yourself, then practice the full set free.
An evaporator is fed with 1000 kg/h of a solution containing 10 percent solids by weight. The concentrated product leaving the evaporator contains 50 percent solids. The rate at which water is evaporated is:easy
Correct answer: 800 kg/h
For a reaction of order greater than zero carried out to the same conversion and temperature, the volume of an ideal CSTR required, compared with that of an ideal plug flow reactor, is:
A live look at what's newest across TestGenius
The progress report of a pupil is prepared from the:
Practice thisThe dyer is dyeing the yarn.
Practice thisBrezhnev, the name borne from 1982 to 1988 in honour of the Soviet leader by a city on the Kama River in Tatarstan, is the present-day Russian city of:
Practice 50 Chemical Engineering multiple-choice questions from Academic & Professional Subjects, covering easy, medium and hard level questions (25 easy, 15 medium, 10 hard). Attempt a batch, check each answer instantly and repeat as often as you like — free, with no signup. Explore more subjects in Academic & Professional Subjects.
Chemical Engineering sits in Academic & Professional Subjects and currently has 50 practice questions: 50% easy, 30% medium, 20% hard. This set leans towards easier questions, which makes it a comfortable starting point before moving on to harder material.
With 50 questions, doing about 25 a day would take roughly 2 days to complete once.
Examples of questions in this subject:
There are 50 Chemical Engineering MCQs on TestGenius (25 easy, 15 medium, 10 hard), as part of Academic & Professional Subjects. You can practise all of them free on this page.
Yes. Chemical Engineering practice on TestGenius is completely free and guest practice needs no signup. Creating a free account unlocks unlimited questions, timed quizzes and certificates.
Yes. A sample of Chemical Engineering questions with their correct answers is shown on this page, and in the practice session every answer is checked instantly as you attempt it.
Work through the Chemical Engineering questions in batches, review each correct answer after you attempt it, and repeat the questions you got wrong until you can answer them confidently. Then take a timed quiz to check yourself under exam pressure.
Correct answer: Larger
In cooling tower terminology, the term 'approach' refers to the difference between:hard
Correct answer: The temperature of the cooled water leaving the tower and the wet-bulb temperature of the entering air
In reactor engineering, the space time of a continuous reactor is defined as:easy
Correct answer: The time required to process one reactor volume of feed, measured at specified feed conditions
The integral (reset) mode of action in a PID controller is provided in order to:easy
Correct answer: Eliminate the steady-state offset (error)
The principal purpose of providing a recycle stream around a reactor in a chemical process is to:easy
Correct answer: Return unreacted reactants to the reactor and thereby increase the overall conversion
Cavitation damage in a centrifugal pump handling a liquid can be avoided by ensuring that:hard
Correct answer: The available net positive suction head exceeds the required net positive suction head of the pump
Water of density 1000 kg/m3 and viscosity 0.001 Pa.s flows at a velocity of 2 m/s through a pipe of internal diameter 0.05 m. The Reynolds number of the flow is:medium
Correct answer: 100,000
In a constant-pressure filtration operation, as the filtration proceeds and the cake builds up, the rate of filtration:medium
Correct answer: Decreases continuously
According to Fick's first law of diffusion, the molar flux of a component due to molecular diffusion is directly proportional to its:hard
Correct answer: Concentration gradient
In the general material balance equation, Input - Output + Generation - Consumption = Accumulation, the accumulation term for a process operating at steady state is:easy
Correct answer: Zero
For a system containing 2 components in which 3 phases coexist in equilibrium, the number of degrees of freedom given by the Gibbs phase rule, F = C - P + 2, is:easy
Correct answer: 1
The Schmidt number used in mass transfer operations is the ratio of:hard
Correct answer: Momentum diffusivity to mass diffusivity
In chemical engineering thermodynamics, the fugacity of a component in a phase is best interpreted as a measure of its:hard
Correct answer: Escaping tendency from that phase
In material balance calculations, a tie component is a substance that:easy
Correct answer: Passes through the process unchanged, being neither produced nor consumed, and is used to link the inlet and outlet streams
In process flowsheet calculations, a system whose degrees of freedom are exactly zero is described as:easy
Correct answer: Exactly specified
During the drying of a wet solid, the constant-rate period comes to an end when the moisture content falls to the:hard
Correct answer: Critical moisture content
The composition of flue gas reported by an Orsat analysis is expressed on a:medium
Correct answer: Dry basis
A liquid mixture in which all the activity coefficients are greater than unity exhibits:hard
Correct answer: Positive deviation from Raoult's law
Fouling deposits that build up on heat exchanger surfaces during operation cause the overall heat transfer coefficient to:easy
Correct answer: Decrease with time
Chemical Engineering sits in Academic & Professional Subjects and currently has 50 practice questions: 50% easy, 30% medium, 20% hard. This set leans towards easier questions, which makes it a comfortable starting point before moving on to harder material.
Yes — signed-in users can take a timed quiz in any subject and earn a certificate by passing it. Practice mode itself is untimed and does not issue certificates.