Practice MCQs and read articles about Electrical Engineering
20 of 50 Electrical Engineering questions, shown with their correct answers — open an answer to check yourself, then practice the full set free.
In an autotransformer, the primary and secondary windings are:easy
Correct answer: Electrically connected, part of the winding being common to both primary and secondary
The synchronous speed of a three-phase induction motor having 6 poles, supplied at 50 Hz, is:
A live look at what's newest across TestGenius
The progress report of a pupil is prepared from the:
Practice thisThe dyer is dyeing the yarn.
Practice thisBrezhnev, the name borne from 1982 to 1988 in honour of the Soviet leader by a city on the Kama River in Tatarstan, is the present-day Russian city of:
Practice 50 Electrical Engineering multiple-choice questions from Academic & Professional Subjects, covering easy, medium and hard level questions (25 easy, 15 medium, 10 hard). Attempt a batch, check each answer instantly and repeat as often as you like — free, with no signup. Explore more subjects in Academic & Professional Subjects.
Electrical Engineering sits in Academic & Professional Subjects and currently has 50 practice questions: 50% easy, 30% medium, 20% hard. This set leans towards easier questions, which makes it a comfortable starting point before moving on to harder material.
With 50 questions, doing about 25 a day would take roughly 2 days to complete once.
Examples of questions in this subject:
There are 50 Electrical Engineering MCQs on TestGenius (25 easy, 15 medium, 10 hard), as part of Academic & Professional Subjects. You can practise all of them free on this page.
Yes. Electrical Engineering practice on TestGenius is completely free and guest practice needs no signup. Creating a free account unlocks unlimited questions, timed quizzes and certificates.
Yes. A sample of Electrical Engineering questions with their correct answers is shown on this page, and in the practice session every answer is checked instantly as you attempt it.
Work through the Electrical Engineering questions in batches, review each correct answer after you attempt it, and repeat the questions you got wrong until you can answer them confidently. Then take a timed quiz to check yourself under exam pressure.
Correct answer: 1000 rpm
Corona on an overhead transmission line is the phenomenon of:hard
Correct answer: Ionisation of the air surrounding the conductor, accompanied by a hissing noise and a violet glow
The superposition theorem for solving electric circuits is applicable only to networks that contain:easy
Correct answer: Linear (bilateral) elements
In a delta-connected three-phase system, the relationship between line voltage and phase voltage is:hard
Correct answer: Line voltage is equal to phase voltage
A network has a Thevenin voltage of 30 V and a Thevenin resistance of 6 ohm. The maximum power that can be delivered to a suitably chosen load is:easy
Correct answer: 37.5 W
In a dynamometer-type wattmeter, the two coils are connected in the circuit as follows:medium
Correct answer: The current coil in series with the load and the pressure coil across the load
In a balanced delta-connected three-phase load, the line current is related to the phase current by:hard
Correct answer: Line current = √3 × phase current
A factory load of 100 kW works at a power factor of 0.7 lagging. The rating of the capacitor bank required to raise the power factor to 0.95 lagging is approximately:easy
Correct answer: 69.2 kVAR
The open-circuit test on a transformer is performed primarily to determine:medium
Correct answer: The core (iron) loss and the magnetising branch parameters of the equivalent circuit
The slip of an induction motor on a 50 Hz supply is 0.04. The frequency of the emf induced in its rotor is:easy
Correct answer: 2 Hz
According to Thevenin's theorem, any linear active network can be replaced, as seen from two terminals, by an equivalent circuit consisting of:easy
Correct answer: A voltage source equal to the open-circuit terminal voltage in series with the equivalent resistance
For maximum power to be transferred from a source network to a load resistor, the load resistance must be:easy
Correct answer: Equal to the Thevenin (internal) resistance of the source network
The diversity factor of a power system is defined as the ratio of:easy
Correct answer: The sum of the individual maximum demands of the consumers to the maximum demand of the whole system
A 250 V DC shunt motor has an armature resistance of 0.5 ohm and takes an armature current of 20 A. The back emf induced in its armature is:easy
Correct answer: 240 V
The speed of a DC shunt motor remains almost constant from no load to full load mainly because:medium
Correct answer: Its flux remains practically constant, as the shunt field is connected across the fixed supply voltage
Applying negative feedback to an amplifier results in:hard
Correct answer: Reduced gain but increased bandwidth and reduced distortion
A four-pole, 50 Hz induction motor runs at a speed of 1440 rpm. Its percentage slip is:easy
Correct answer: 4 percent
A permanent-magnet moving-coil (PMMC) instrument is suitable for measuring:medium
Correct answer: Direct current and voltage only, because its deflection depends on the average value of the current
A load of 15 ohm is connected across the terminals of a network whose Thevenin equivalent is a 20 V source in series with 5 ohm. The power dissipated in the load is:medium
Correct answer: 15 W
Electrical Engineering sits in Academic & Professional Subjects and currently has 50 practice questions: 50% easy, 30% medium, 20% hard. This set leans towards easier questions, which makes it a comfortable starting point before moving on to harder material.
Yes — signed-in users can take a timed quiz in any subject and earn a certificate by passing it. Practice mode itself is untimed and does not issue certificates.